Ragnar Floors

Company Description:

We sand the floor with 7 or 8 grades of different sandpaper. It sounds like a lot but we are sanding off the wood a paper-layer at a time. You don’t want to sand off more wood flooring than you have to but you must sand out all of the imperfections.

We sand the hardwood floor so that it is tabletop smooth, we then apply multiple coats of clear commercial high-grade urethane. We do a light sanding in between each coat of finish.

If you prefer to have the floor stained (any color) once we have the hardwood floor tabletop smooth, we then wash the floor with denatured alcohol mixed with water. That opens the grain of the hardwood floor so that the stain can penetrate and gives the floor a deep rich even color. We let that dry, we then stain the hardwood floor. We stain the floor in the direction of the grain. We stain about a 2-foot section at a time working from one side of the room to the other. We let the stain sit for a minute or two before wiping it off. We buff the stain into the wood with a high-speed buffer once the stain has dried we then start applying the 4 coats of clear polyurethane.

Show Specials:

Register for an estimate at the show and receive 10 percent off your next service.

New Products

Ragnar Floors uses only hight quality finishes and our preferred finish is Loba!

Badges: